Compact saw/angle grinder


34461A
Manufacturer: Dremel
Quantity:1
Location: Woodworking Area
Category: Metalworking Hand Tools Post Processing Subtractive
Operational *
Hazard Class 2
Assisted Access
*Equipment has not been setup and commissioned. Planned to be available by November 2018.
     

Overview

Compact saw. make quick cuts in a wide variety of material and perfect for straight cuts, flush cuts and plunge cuts

Average tip temperature can be "offset" to +/- 9°F at idle with no load Temperature stability °F ± 10 Heating time (approx.) in seconds (50–350 °C/120–660 °F): 28 sec.

Technical Details

Length (cm) 33
Width (cm) 8
Height (cm) 9
Weight (kg) 1.7
Power (W) 710
Voltage (V)) 220 - 240
     

Useful Links

  • Manufacture Website
    • -->
         

    Access & Hazard Information

     

    Standard Access

    Members are allowed to use this equipment. Access rules are defined by the equipment’s hazard class. Read the hazard class descriptions.

    Hazard Class 2 
    1. Hazards: Minor injuries that can be resolved with first aid kit or ice pack, but potentially requiring additional medical assistance
    2. Power: 0.25-0.5 HP, less than 10 amps, 120 VAC, 18-24V DC, specialized/enclosed CNC machines
    3. Examples: Low to medium power tools. Mid-range powered hand tools, laser cutters, self-standing manual tools (arbor press), low powered CNC mills, routers and lathes (interlocked/enclosed), thermal formers
    4. Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning and a note in the members file and mandatory retraining.
    5. Supervision Requirements: The Makerspace must be open and a makerspace staff member must be present in the facility.