Publications in Reverse Chronological Order

 

  1.   Johnson, O., B. Joseph and J. N. Kuhn (2021). "CO2 separation from biogas using PEI-modified crosslinked polymethacrylate resin sorbent." Journal of Industrial and Engineering Chemistry 103: 255-263.
  2.   Low temperature dry reforming of methane using Ru-Ni-Mg/ceria-zirconia catalysts: Effect of Ru loading and reduction temperature, Sokefun, Y.O.,Trottier, J.,Yung, M.M.,Joseph, B.,Kuhn, J.N.,Applied Catalysis A: General, 2022, 645
  3.   Techno-economic and sustainability analysis of siloxane removal from landfill gas used for electricity generation, Amaraibi, R.J.,Joseph, B.,Kuhn, J.N., Journal of Environmental Management, 2022, 314
  4.   Enhancing reactant selectivity for Ni/Mg reforming catalysts using silicalite-1 shells: A modeling study, Gray, B., Kuhn, J.N., Joseph, B., Chemical Engineering Journal, 2022, 437
  5.   He, Y., H. Z. Shi, O. Johnson, B. Joseph and J. N. Kuhn (2021). "Selective and Stable In-Promoted Fe Catalyst for Syngas Conversion to Light Olefins." Acs Catalysis 11(24): 15177-15186
  6.  Web-Based Virtual Lab for Learning Design, Operation, Control, and Optimization of an Anaerobic Digestion Process, JL Guzmán, B Joseph, Journal of Science Education and Technology, 1-12 1 2020
  7.  Closed-loop dynamic real-time optimization (CL-DRTO) of a bioethanol distillation process using an advanced multilayer control architecture, IML Pataro, MVA da Costa, B Joseph, Computers & Chemical Engineering 143, 107075 4 2020
  8.  X Zhao, JK Babu Joseph, S Ozcan Biogas Reforming to Syngas: A Review, , iScience 23 (5) 4,2020
  9.  RG Bezerra De Araujo, MV da Costa, B Joseph, JL Guzman Sanchez, Developing Professional and Entrepreneurship Skills of Engineering Students Through Problem-Based Learning: A Case Study in Brazil, INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION 36 (1), 155-169, 2020
  10.  MVA da Costa, A Narasimhan, D Guillen, B Joseph, DY Goswami, Generalized distributed state space model of a CSP plant for simulation and control applications: Single-phase flow validation Renewable Energy 153, 36-48, 1, 2020
  11.  Zhao, X.; Stachurski, P.; Shah, S.; Maiti, D.; Ramani, S.; Wright, A.; Walker, D. M.; Joseph, B.; Kuhn, J. N., Design and Optimization of Nimg/Ceria-Zirconia Catalyst Pellets. Powder Technology 357, 214-222, 2019.
  12.  Sokefun, Y. O.; Joseph, B.; Kuhn, J. N., Impact of Ni and Mg Loadings on Dry Reforming Performance of Pt/Ceria-Zirconia Catalysts. Industrial & Engineering Chemistry Research 58 (22), 9322-9330, 2019.
  13.  Pataro, I. M. L.; da Costa, M. V. A.; Joseph, B., Advanced Simulation and Analysis of Mimo Dead Time Compensator and Predictive Controller for Ethanol Distillation Process. IFAC-Papers, OnLine 2019, 52, 160-165.
  14.  A Mixed-Metal Porphyrinic Framework Promoting Gas-Phase CO2 Photoreduction without Organic Sacrificial Agents, WY Gao, HT Ngo, Z Niu, W Zhang, Y Pan, Z Yang, VR Bhethanabotla, ChemSusChem 13 (23), 6273-6277 1 2020
  15.  Naqi, A.; Kuhn, J. N.; Joseph, B., Techno-Economic Analysis of Producing Liquid Fuels from Biomass Via Anaerobic Digestion and Thermochemical Conversion. Biomass and Bioenergy, 2019, 130, 105395.
  16.  NiMg/Ceria-Zirconia Cylindrical Pellet Catalysts for Tri-reforming of Surrogate Biogas. Zhao, Xianhui; Walker, Devin M.; Maiti, Debtanu; et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH Volume: 57 Issue: 3 Pages: 845-855 Published: JAN 24 2018.
  17.  Tri-reforming of surrogate biogas over Ni/Mg/ceria-zirconia/alumina pellet catalysts. Zhao, Xianhui; Ngo, Huong T.; Walker, Devin M.; et al. CHEMICAL ENGINEERING COMMUNICATIONS Volume: 205 Issue: 8 Pages: 1129-1142 Published: 2018.
  18.  Economic analysis and life cycle impact assessment of municipal solid waste (MSW) disposal: A case study of Mumbai, India Yash D Mehta, Yogendra Shastri1 and Babu Joseph,Waste Management and Research, https://doi.org/10.1177/0734242X18790354
  19.  Conversion of landfill gas to liquid fuels through a TriFTS (tri-reforming and Fischer–Tropsch synthesis) process: a feasibility study, Xianhui Zhao , Ahmad Naqi , Devin M. Walker, Tim Roberge , Matthew Kastelic , Babu Joseph and John N. Kuhn DOI: 10.1039/C8SE00344K (Paper) Sustainable Energy Fuels, 2019, 3, 539-549
  20.  Internet in Automation and Process Control Systems, Instrument Engineers Handbook, Volume 3: Process Software and Digital Networks, CRC Press, 2018
  21.  Cimenler, U., B. Joseph and J. N. Kuhn (2015). "Molecular-Size Selective H–ß Zeolite-Encapsulated Ce-Zr/Ni-Mg Catalysts for Steam Reforming." Applied Catalysis A: General: 505, p 494-500 (DOI: doi:10.1016/j.apcata.2015.1005.1014).
  22.  Elsayed, N. H., N. Roberts, B. Joseph and J. N. Kuhn (2016). "Low temperature dry reforming of methane over Pt-Ni-Mg/ceria-zirconia catalysts." Applied Catalysis B: Environmental 179: 213-219.
  23.  Elsayed, N. H., N. R. M. Roberts, B. Joseph and J. N. Kuhn (2016). "Comparison of Pd-Ni-Mg/Ceria-Zirconia and Pt-Ni-Mg/Ceria-Zirconia Catalysts for Syngas Production via Low Temperature Reforming of Model Biogas." Topics in Catalysis 59(1): 138-146.
  24.  U Cimenler, B Joseph, JN Kuhn. “ Hydrocarbon steam reforming using Silicalite-1 zeolite AIChE Journal January 2017 Vol. 63, No. 1 DOI 10.1002/aic 201
  25.  Dutta, Debosruti, S. Chowdhury, CT Yang, VR Bhethanabotla, B Joseph (2017) “Controlling Metal-Enhanced Fluorescence Using Bimetallic Nanoparticles, Chapter in Edited volume : Surface Plasmon Enhanced, Coupled and Controlled Fluorescence, Chris D. Geddes Editor, John Wiley, NY 2017, ISBN 978-1-118-02793-6
  26.  JN Kuhn, AC Elwell, NH Elsayed, B Joseph,(2017) “Requirements, techniques, and costs for contaminant removal from landfill gas”, Waste Management, 63, p246-256,2017 – Elsevier
  27.  U Cimenler, B Joseph, JN Kuhn, “Effect of Zeolite Membrane Shell Thickness on Reactant Selectivity for Hydrocarbon Steam Reforming Using Layered Catalysts”, Energy & Fuels, 30, p 5300-5308, 2016
  28.  Elsayed, N.H., Elwell, A. Joseph, Kuhn, J.N., (2017) Effect of silicon poisoning on catalytic dry reforming of simulated biogas”, Applied Catalysis A: General, 538, p 157-164.
  29.  Electron injection study of photoexcitation effects on supported subnanometer Pt clusters for CO2 photoreduction, Yang, Chi-Ta; Wood, Brandon C.; Bhethanabotla, Venkat R.; et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS Volume: 20 Issue: 23 Pages: 15926-15938 Published: JUN 21 2018
  30.  Layered Catalysts for Low Temperature Size Selective Reforming of Hydrocarbons, Cimenler, Ummuhan; Elsayed, Nada H.; Maiti, Debtanu; et al. TOPICS IN CATALYSIS Volume: 61 Issue: 9-11 Special Issue: SI Pages: 844- 854 Published: JUN 2018
  31.  Precious Metal Doped Ni-Mg/Ceria-Zirconia Catalysts for Methane Conversion to Syngas by Low Temperature Bi-reforming Elsayed, Nada H.; Maiti, Debtanu; Joseph, Babu; et al. CATALYSIS LETTERS Volume: 148 Issue: 3 Pages: 1003-1013 Published: MAR 2018
  32.  Design and analysis of siloxanes removal by adsorption from landfill gas for waste-to-energy processes, Elwell, Anthony C.; Elsayed, Nada H.; Kuhn, John N.; et al. WASTE MANAGEMENT Volume: 73 Pages: 189-196 Published: MAR 2018
  33.  Mankidy BD, Balakrishnan N, Joseph B and Gupta VK. CO Oxidation by Cobalt Oxide: An Experimental Study on the Relationship between Nanoparticle Size and Reaction Kinetics. Austin J Chem Eng. 2014;1(2): 1008
  34.  Gardezi, S.A. and B. Joseph, Performance Characteristics of Eggshell Co/SiO2 Fischer-Tropsch Catalysts: A Modeling Study. Industrial & Engineering Chemistry Research, 2015. 54(33): p. 8080-8092.
  35.  Yang, Chita, B. Wood, V. Bhethanabotla, B. Joseph, The Effect of the morphology of supported subnanometer Pt clusters on the first and key step of CO2 photoreduction, Phys. Chem. Chem. Phys, 17, 15379-25392, 2015.
  36.  Yaghoubi, H., Li, Zhi, Chen, Y.,  Ngo, HT, Bhethanabotla, V., Joseph, B, Ma, SQ, Schlaf, R, Takshi, A., Toward a Visible Light-Driven Photocatalyst: The Effect of Midgap States Induced Gap of Undoped TiO2 Nanoparticles, ACS Catalysis, 5, 1, 327-335, 2015
  37. Chi-Ta Yang, Brandon C. Wood, Venkat Bhethanabotla, and Babu Joseph, CO2 Adsorption on Anatase TiO2 (101) Surfaces in the Presence of Subnanometer Ag/Pt Clusters: Implications for CO2 Photoreduction, J. Phys. Chem. C, 118, 45, 26236-26248, 2014.  DOI: 10.1021/jp509219n
  38.  Yang, C. T.; Balakrishnan, N.; Bhethanabotla, V. R.; Joseph, B. Interplay between Subnanometer Ag and Pt Clusters and Anatase TiO2 (101) Surface: Implications for Catalysis and Photocatalysis. Journal of Physical Chemistry C 2014, 118, 4702-4714.
  39.  Syed Ali Gardezi,Babu Joseph,Faustino Prado,Alejandro Barbosa, Thermochemical biomass to liquid (BTL) process: Bench-scale experimental results and projected process economics of a commercial scale process, Biomass and Bioenergy, 59, 2013, 168-186, 2014
  40.  Balakrishnan, Nianthrini; Joseph, Babu; Bhethanabotla, Venkat R.Effect of Pt and Ru promoters on deactivation of Co catalysts by C deposition during Fischer-Tropsch synthesis: A DFT study APPLIED CATALYSIS A-GENERAL  Volume: 462   Pages: 107-115   DOI: 10.1016/j.apcata.2013.05.001   Published: JUL 10 2013
  41. Mankidy, Bijith D.; Joseph, Babu; Gupta, Vinay K., Photo-conversion of CO2 using titanium dioxide: enhancements by plasmonic and co-catalytic nanoparticles , NANOTECHNOLOGY  Volume: 24   Issue: 40   Article Number: 405402   DOI: 10.1088/0957-4484/24/40/405402   Published: OCT 11 2013
  42.  "Use of Secondary Measurements in Process Control," Advances in Instrumentation, Vol. 34, Part I, Instrument Society of America (1979).
  43.  Syed Ali Gardezi, John T. Wolan, Babu Joseph∗Effect of catalyst preparation conditions on the performance of eggshell cobalt/SiO2 catalysts for Fischer–Tropsch synthesis, Applied Catalysis A: General 447– 448 (2012) 151– 163
  44. Syed Ali Gardezi, Lucky Landrigan, Babu Joseph, and John T. Wolan, Synthesis of Tailored Eggshell Cobalt Catalysts for Fischer–Tropsch Synthesis Using Wet Chemistry Techniques, Ind. Eng. Chem. Res., 2012, 51 (4), pp 1703–1712.
  45.  N. Balakrishnan, V. Bhethanabotla, B. Joseph, “Promotional Effect of Platinum in Fischer Tropsch Synthesis Using Cobalt Catalysts: A DFT Study,” Surface Science, Volume 606, Issues 5–6, March 2012, Pages 634–643.
  46.  D. Srinivasagupta and  B. Joseph, “Internet-based Process Control. Instrumentation Engineers Handbook (IEH ),Volume 3: Digital Process, Networks, and Software (4th edition), by Bela Liptak and Halit Eren,  Taylor and Francis, ( 2010)
  47.  Kababji, A., Joseph, B. and Wolan, J., “Cobalt silica supported catalysts for use in Fischer-Tropsch synthesis: Effects of calcination temperature and support surface area on cobalt silicate formation”, Catalysis Letters  (2009),  130(1-2),  72-78
  48. Age-related changes in the aortic valve affect leaflet stress distributions: Implications for aortic valve degeneration .  Singh, R; Strom, JA; Ondrovic, L, M. VanAuker and B. Joseph,  JOURNAL OF HEART VALVE DISEASE   Volume: 17   Issue: 3   Pages: 290-298   Published: 2008
  49. Flow induced by acoustic streaming on surface-acoustic-wave devices and its application in biofouling removal: A computational study and comparisons to experiment, Author(s): Sankaranarayanan SKRS, Cular S, Bhethanabotla VR, and B. Joseph, PHYSICAL REVIEW E   Volume: 77   Issue: 6 Article Number: 066308   Part: Part 2   Published: JUN 2008
  50. Sankaranarayanan, Subramanian K. R. S.; Bhethanabotla, Venkat R.; Joseph, Babu.   Molecular Dynamics Simulation Study of Phase Transformations in Transition Bimetallic Nanowires.    Journal of Physical Chemistry C  (2007),  111(6),  2430-2439.
  51. Sankaranarayanan, Subramanian K. R. S.; Bhethanabotla, Venkat R.; Joseph, Babu.   Molecular dynamics simulation of temperature and strain rate effects on the elastic properties of bimetallic Pd-Pt nanowires.    Physical Review B: Condensed Matter and Materials Physics  (2007),  76(13),  134117/1-134117/13. 
  52. "Electrochemical Noise Corrosion Monitoring of Post Tensioned Tendons", L. V. Taveira, B. Joseph, and A. A. Sagüés, pp. 129-138, ECS Transactions Vol. 13, Issue 13, 210th ECS Meeting , October 29-November 3, 2006, Cancun, Mexico, "Corrosion of Infrastructure", The Electrochemical Society, Pennington, NJ, 2007.
  53. "ASPEN:  An Advanced System for Process Engineering", (with L. B. Evans, et al), Computers and Chemical Engineering, Vol. 3, p. 319 (1979).
  54. Sankaranarayanan, Subramanian K. R. S.; Bhethanabotla, Venkat R.; Joseph, Babu.   A 3-D finite element model of surface acoustic wave (SAW) sensor response.    ECS Transactions  (2006),  1(19, Acoustic Wave Based Sensors and Sensor Systems),  19-27.  CODEN: ECSTF8  CAN 147:290755  AN 2007:706642    CAPLUS 
  55. Srinivasagupta, Deepak; Kardos, John L.; Joseph, Babu.   Analysis of pull-force in injected pultrusion.  Journal of Advanced Materials (Covina, CA, United States)  (2006),  38(1),  39-
  56. Miao, Ling; Bhethanabotla, Venkat R.; Joseph, Babu., Melting of Pd clusters and nanowires: A comparison study using molecular dynamics simulation. Physical Review B: Condensed Matter and Materials Physics  (2005),  72(13),  134109/1-134109/12.
  57.  “Detection Of Corrosion Of Post-Tensioned Strands In Grouted Assemblies”. L. V. Taveira, A. A. Sagüés, J. Lopez-Sabando and B. Joseph, NACE INternational Corrosion/08 conference in New Orleans, 3/16-3/20, 2008. Paper No. 08398
  58. Miao, Ling; Bhethanabotla, Venkat R.; Ossowski, M. M.; Joseph, Babu.   Interactions of Hydrogen with Pd and Pd/Ni Alloy Chain-Functionalized Single Walled Carbon Nanotubes from Density Functional Theory.  Journal of Physical Chemistry B     1520-6106.   2006
  59. Sankaranarayanan, Subramanian K. R. S.; Bhethanabotla, Venkat R.; Joseph, Babu.   Molecular dynamics simulation study of the melting and structural evolution of bimetallic Pd-Pt nanowires.     Physical Review B: Condensed Matter and Materials Physics  (2006),  74(15),  155441/1-155441/12. 
  60. Sankaranarayanan, Subramanian K. R. S.; Bhethanabotla, Venkat R.; Joseph, Babu.   Molecular dynamics simulations of the structural and dynamic properties of graphite-supported bimetallic transition metal clusters. Physical Review B: Condensed Matter and Materials Physics  (2005),  72(19),  195405/1-195405/15.  2006
  61. Sankaranarayanan, K.R.S.S., Bhethanabotla V.R., and Joseph, B., Molecular dynamics simulation study of the melting of Pd-Pt nanoclusters. Physical  Reviews B, 2005. 71: p. 195415-1-15.
  62. Arrietta, Idelfonso; Joseph, Babu; Sagues, Alberto; Surface Area Dependence Of Electrochemical Noise Of Aluminum Alloys In Chloride Media, Paper No. 04456, Corrosion/2004, NACE International, Houston, Texas, 2004.
  63. Potaraju, Sairam; Srinivasagupta, Deepak; Joseph, Babu; Kardos, John L. Steady State and Dynamic Analysis of the Injected Pultrusion Process. Composites Part A: Applied Science and Manufacturing  34 (2003) 835-846.
  64.  "Routing of Calculation Methods in Process Simulation," _(with L. B. Evans, W. D. Seider, and E. Wong), Industrial and Engineering Chemistry, Process Design and Development, Vol. 18, 282 (1979).
  65.  Majumdar, Prasun; Mahfuz, Hassan; Srinivasagupta, Deepak; Joseph, Babu. Effect of Processing Conditions and Material Properties on the Debond Fracture Toughness of Foam-Core Sandwich Composites: Experimental Optimization. Submitted to Composites Part A: Applied Science and Manufacturing  (2003), 34(11), 1097-1104.
  66. Srinivasagupta, Deepak; Kardos, John L.; Joseph, Babu. Economic Design of the Injected Pultrusion Process with Environmental and Operability Considerations. Submitted to Journal of Composite Materials. (2003),37(20), 1851-1880.
  67. Srinivasagupta, Deepak; Joseph, Babu. An Internet-mediated Process Control Laboratory. IEEE Control Systems Magazine (2003), 23(1), 11-18.
  68. Srinivasagupta, Deepak; Joseph, Babu; Majumdar, Prasun; Mahfuz, Hassan. Effect of Processing Conditions and Material Properties on the Debond Fracture Toughness of Foam-Core Sandwich Composites: Process Model Development. Submitted to Composites Part A: Applied Science and Manufacturing. (2003),34(11), 1085-1095..
  69. Srinivasagupta, Deepak; Morley, Robert E.; Joseph, Babu. A New In-situ Sensor Modeling Approach to Measurement Validation. Industrial and Engineering Chemistry Research, 2003, 42, 2324-2333.
  70. Srinivasagupta, Deepak; Joseph, Babu; Schättler, Heinz. Time-stamped Model Predictive Control: An Algorithm for Control of Processes with Random Communication Delays. Computers and Chemical Engineering (2004),  28(8),  1337-1346. 
  71. Srinivasagupta, Deepak; Kardos, John L.; Joseph, Babu. Towards a Better Understanding of Pull-force in the Injected Pultrusion Process. Accepted by SAMPE Journal of Advanced Materials.
  72. B. Joseph, C.Y. Ying and D. Srinivasagupta, “A Laboratory to Supplement Course in Process Control”, Chemical Engineering Education, Vol 36, No.1, Winter 2002, 20-25.
  73. Ying, C.Y., B. Joseph, “ Identification of Stable Linear Systems Using Polynomial Kernels:, Ind. And Eng. Chem. Res. , 1999, 38, 4712-4728.
  74. Sairam, P., B. Joseph, J.L. Kardos and B.Khomami," A Flexible Approach to Modeling and Simulation of Polymeric Composite Materials Processing Using Object Oriented Techniques", Comput. Chem. Eng.  (2000),  24(8),  1961-
  75. Dai, X.D., B.Joseph, R.L. Motard and D.Silverman, "Corrosion Process Monitoring Using Electrochemical Noise," Corrosion Journal, 57(5), 394-403, 2001.
  76. Dai, X.D., B.Joseph, R.L. Motard and D.Silverman, "Corrosion Process Monitoring Using Wavelet Analysis,"Ind. Eng. Chem. Res.  (2000),  39(5),  1256-1263. 
  77.  Inferential Control of Processes, Part III, Construction of Optimal and Suboptimal Estimators," (with C. B. Brosilow), AIChE Journal, Vol. 24, No. 3, 500 (1978).
  78. Thomas, M.M., B. Joseph and J.L. Kardos, "Experimental Characterization of Autoclave-Cured Glass-Epoxy Composite Laminates: Cure Cycle Effects Upon Thickness, Void Content and Related Phenomena," Polymer Composites, 1997, 18, 3, 283-299.
  79. Ying, Chao-Ming and Babu Joseph, "Linear System Identification using Polynomial Models,Industrial & Engineering Chemistry Research," 1998, 38, 4712-4728.
  80. Ying, Chao-Ming and Babu Joseph,  "System Identification of Chemical Processes in Frequency Domain using Polynomial Model," Submitted to Jl of Process Control, 1999.
  81. Ying, Chao-Ming and Babu Joseph, "Sensor Fault Detection Using Noise Analysis," Industrial & Engineering Chemistry Research, 2000, 39, 396-407.
  82. Thomas, M.M, B. Joseph and J.L.Kardos, " Batch Process Quality Control Applied to Curing of Composite Materials", AIChE Journal, 43, 10, pp. 2535-2545, 1997.
  83. Ying, Chao-Ming and Babu Joseph, " Performance and Stability Analysis of LP-MPC and QP-MPC Cascade Control Systems",  AIChE Journal, Vol 45, No. 7, 1521-1534.
  84. Voorakaranam,S., J.L. Kardos and B. Joseph, " The Use of Process Models to Control and Optimize Pultrusion-Type Processes", SAMPE Journal,Vol 35, No 3, 1999.
  85. Voorakaranam, S. and B. Joseph, " Model Predictive Inferential Control with Application to Composites Manufacturing Process.",  Ind.& Eng. Chem. Res., 38, 433-450, 1999.
  86.  Voorakaranam,S., J.L. Kardos and B. Joseph, " Modeling and Control of an Injection Pultrusion Process", Journal of Composite Materials, 33,13,1173-1205,1999.
  87.  "Expert Systems and Artificial Intelligence", Chapter in Instrument Engineers' Handbook on Process Control, Third Edition, B.G. Liptak, Editor, Chilton Book Company, 1995.
  88.  "Inferential Control of Processes, Part I, Steady State Analysis and Design," (with C. B. Brosilow), AIChE Journal, Vol. 24, No. 3, 485 (1978).
  89.  'Intelligent Control of Product Quality in Composite Manufacturing", with M.M. Thomas, chapter in book: Processing of Continuous Fiber Reinforced Composites, Edited by R.S. Dave and A. Loos, to be published by Karl Hanser Verlag, Germany, 1996.
  90.  "Process Identification Using Discrete Wavelet Transforms- Design of Prefilters", with S. Palavajjhala and R.L. Motard, AIChE Journal, 42,3,777-790, 1996.
  91. "Predictive Control of Quality in Batch Polymerization Using a Hybrid Artificial Neural Network Model", with A.Y.D. Tsen, S.S. Jang and D.S.H. Wong, AIChE Journal, 42,2,455-465, 1996.
  92. "Predictive Control of Quality in Batch Polymerization Using Artificial Neural Network Models", with A.Y.D. Tsen, S.S. Jang, D.S.H. Wong, Proceedings of the Fifth International Symposium on Process Systems Engineering (PSE'94), pp 899-903, Kyongju, Korea, June 1994.
  93. 45    "Process Identification Using Discrete Wavelet Transforms", with S. Palavajjhala and R.L. Motard, ADCHEM ,94, Proceedings of the IFAC Sympsium on Advanced Control of Chemical Processes,pp 477-483, Kyoto, Japan, May 1994.
  94.  "Process Signal Features Analysis", with X.D. Dai and R.L. Motard, Chapter in Wavelet Applications in Chemical Engineering, R.L. Motard and B. Joseph, Editors, pp 115-136, Kluwer Academic Publishers, Boston,  1994.
  95. "Computational Aspects of Wavelets and Wavelet Transforms", with S. Palavajjhala and R.L. Motard, Chapter in Wavelet Applications in Chemical Engineering, R.L. Motard and B. Joseph, Editors, pp 33-76,  by Kluwer Academic Publishers, Boston,  1994.
  96.  "Introduction to Wavelet Transforms and Time Frequency Analysis", with X.D. Dai and R.L. Motard, Chapter in Wavelet Applications in Chemical Engineering, R.L. Motard and B. Joseph, Editors, pp 1-26, Kluwer Academic Publishers, Boston,  1994.
  97. "Blocking and Condensing Design for Quadratic Dynamic Matrix Control using Wavelets", with S. Palavajjhala and R.L. Motard, Ind. Eng. Chem. Res.,33, 1159-1178, 1994.
  98.  "Model based Control of Voids and Product Thickness during Autoclave Curing of Carbon/Epoxy Composite Laminates", with F.H. Wang-Hanratty and J.L. Kardos, Journal of Composite Materials,29,8,1000-1025, 1995.
  99. Improve Control of Distillation Columns Using Multiple Temperature Measurements," (with C. B. Brosilow, J. Howell and N. R. D. Kerr), Hydrocarbon Processing Journal, March 1976.
  100.  "Predictive Control of Quality in Batch Manufacturing Process Using Artificial Neural Network Models", with F.H. Wang-Hanratty, Ind. Eng. Chem. Res. 1993, 32, 1951-1961.
  101. "Knowledge Representation and Reasoning in the Presence of Uncertainty in an Expert System for Laboratory Reactor Selection", with P.J. Hanratty and M.P. Dudukovic.  Ind. & Engg. Chem. Res. 1992,31,228-238..
  102.  "Exploratory Data Analysis: A Comparison of Statistical Methods with Artificial Neural Networks", with F.H. Wang and D.S. Shieh., Comp. and Chem. Engg. Jl, Vol 16, No 4, pp 413-423, (1992)
  103.  "Exploratory Data Analysis Using Inductive Partitioning and Regression Trees", with D.S. Shieh. , Ind. Engg. Chem. Res. 31, pp 1989-1998 (1992)
  104.  "Decision Making in Chemical Engineering and Expert Systems: Application of the Analytical Hierarchy Process to Reactor Selection", with P.Hanratty, Comp. and Chem. Engg. Jl., Vol 16, No 9, pp 849-860 (1992)
  105.  "Measurement Selection and Detection of Measurement Bias in the Context of Model Bias in the Context of Model Based Control and Optimization". (with K.Kage).Ind. and Engg. Chem. Res.,29,10,2037-2043,1990.
  106. "Model Based and Knowledge Based Control of Pultrusion Processes", (with H.T. Wu). SAMPE Journal,26,6,59-70,1990.
  107. 32    "Knowledge Based Control of Autoclave Curing of Composites",(with H.T.Wu),SAMPE Journal,26,6,39-54,1990.
  108.  "Expert Systems in Process Control", Control,Vol III,8,58-61,1990
  109.  "Consider Application Requirements When Selecting Between Analog and Digital Filters", Personal Engineering  and Instrumentation News,7,2,89-92,1990.
  110.  "System Structures for Process Simulation," (with L. B. Evans and W. D. Seider).  AIChE Journal, Vol. 24, No. 3, 485 (1978).
  111.  "Digital Implementation of PID Loops on PCs Require Special Considerations", Personal Engineering and Instrumentaion News,7,4,72-77,1990.
  112. "A Blackboard Architecture for Model Based and Knowledge Based Control", (with H.T. Wu) , Chem. Engg. Sci., Vol 47, No 4, pp 917-928 (1992)
  113.  "The Use of Expert System Technology for Batch Process Control:  An Evaluation of Some Tools",  Chemical Engineering Progress, 85, 11, pp. 87-91 (1989).
  114.  "Simulation of Fixed-Bed Gas-Solid Reactors Using an Adaptive Spline Collocation Method", (with A. Bhattacharya), Comp. Chem. Eng., Vol. 12, 4, 351 (1988).
  115. "Experimental and Modeling Studies in Fixed-Bed Coal Gasification", (with A. Bhattacharya and M. P. Dudukovic). Ind. and Eng. Chem., Proc. Des. Dev., 25, 988 (1986).
  116.  "On-Line Optimization of a Packed Tubular Reactor", (with C. Y. Chen).  Ind. and Eng.  Chem. Res., 26, pp. 1924-1930, (1987).
  117. "Control of Constrained Multivariable Nonlinear Processes Using a Two-Phase Approach", (with H. Mukai and S. S. Jang).  Ind. and Eng. Chem. Proc. Des. Dev., 26, 10, pp. 2106-2113 (1987).
  118. "A Comparison of Two Approaches to On-Line Parameter Estimation and State Estimation of Nonlinear Systems", (with H. Mukai and S. S. Jang).  Ind. and Eng. Chem. Proc. Des. Dev., 25, 809 (1986).
  119. "On-Line Optimization of Constrained Multivariable Processes", (with H. Mukai and S. S. Jang) AIChE Journal, 33, 26 (1987).
  120. "Reduced Order Models for Separation Processes, Part VI:  Treatment of Columns with Flat and Steep Profiles", Paper Accepted by Computers and Chemical Engineering Journal, Vol. 11, 2, pp. 165-176, 1987.
  121.  "Numerical Treatment of Laminar Flow in Oscillating Helical Pipes, Part II," (with R. J. Adler), AIChE Journal, Vol. 21, No. 5, 974 (1975).
  122.  "Reduced Order Models for Separation Processes, Part V:  Selection of Collocation Points", Computers and Chemical Engineering Journal, 9, 601 (1986).
  123. "Reduced Order Models for Separation Processes, Part IV:  Treatment of Columns with Multiple Feeds and Sidedraws via Spline Fitting", Computers and Chemical Engineering Journal, Vol. 11, 2, pp. 159-164, 1987.
  124.  "Experiments in Temperature Measurement and Control Using Microcomputers" (with D. Millard and D. Elliott).  Control Systems Magazine, Vol. 5, No. 3 (1985).
  125. "Experiments in Process Control Using Personal Computers" (with D. Elliott), Chemical Engineering Education, Vol. 18, No. 4 (1984).
  126. "Reduced Order Models for Separation Processes, Part III:  Application to Columns with Multiple Feed and Withdrawals" (with Y. S. Cho), Computers and Chemical Engineering Journal, Vol. 8, 2 (1984).
  127.  "Simulation of Packed-Bed Separation Process Using Orthogonal Collocation" (with R. K. Srivastava), Computers and Chemical Engineering Journal, Vol. 8, No. 1, p. 433 (1984).
  128.  "Dynamic Modeling of Moving-bed Gasifiers", (with M. Kim), Industrial and Engineering Chemistry, Process Design and Development, Vol. 22, 212 (1983).
  129.  "Reduced Order Steady State and Dynamic Models for Separation Precesses, Part II, Application to Multicomponent Distillation" (with Y. S. Cho), AIChE Journal, Vol. 29, No. 2, 270 (1983).
  130.  "Reduced Order Steady State and Dynamic Models for Separation Processes, Part I, Development of the Model Reduction Procedure," (with Y. S. Cho), AIChE Journal, Vol. 29, No. 2, 261 (1983).
  131. "A Heterogeneous Model for Moving-bed Coal Gasifiers," (with Y. S. Cho), Industrial and Engineering Chemistry, Process Design and Development, Vol. 20, 318 (1981).
  132. "Numerical Treatment of Laminar Flow on Helical Pipes of Square Cross-section, Part I, Stationary Helical Pipes," (with R. J. Adler and E. P. Smith), AIChE Journal, Vol. 21, No. 5, 974 (1975).

© 2010 Babu Joseph. All rights reserved.